Automatic Multi-stage contact lens cleaning

Our BR-AMS LENS series machines are specially designed for RGP contact lens manufacturers, with the aim of optimizing the last stages of the lens manufacturing process. Until now, the removal of the blocking wax and final cleaning of the lenses was a time consuming process, carried out with tedious manual methods, which could cause damage to the lenses.

With the BR-AMS series of multi-stage cleaning machines, the removal of blocking wax and final cleaning processes are done automatically, in a very short time and with a 100% success rate, while assuring the total integrity of the lenses. The ultrasonic cleaning stage works by immersion: The lenses are placed in a custom-designed tool and immersed in the cleaning fluid, in which the ultrasonic cleaning effect carries out the complete cleaning of the lenses. The lenses are then rinsed and/or dried according to the customer’s needs.


  • Full automation of the lens cleaning process. The PLC,
    robot arm, and all the electronic components permit the automatic transportation of the lenses through the stages and the automatic perform of the full cleaning cycle. All functionalities and cleaning programs are easily managed from the touch-screen panel.
  • Fast and safe cleaning of the lenses. BRIO ultrasonic cleaning produces a microbrushing at a molecular level that eliminates any kind of dirt in a very short time, leaving the lenses completely clean without damaging them. Our BRIO ultrasonic cleaning system can be adapted to any shape and size of corneal or scleral lenses. We also develop specific carrying tools for each one.
  • Exclusive technology that ensures your production goals. The toughest and most efficient on the market thanks to our hot bonding process.
  • Cleaning programs adapted to customer’s needs. We can establish various programs that are selected from the control panel. For example: lens deblocking, final cleaning and other cleaning programs before inspection, plasma treatment or final cleaning.


  • Specific dimensions and tools according to the number of lens to be treated.
  • Custom stages depending on client needs.
  • BRIO ultrasonic emitters. The most robust and efficient on the market thanks to our hot bonding process.
  • High power ultrasonic generators with high performance ultrasonics.
  • Manufactured in high thicknesses AISI 304/316 for maximum durability.
  • Frequency according to application. We set the optimum frequency for each lens cleaning application.
  • Adjustable legs in stainless steel-rubber.
  • Safety module and emergency stop.
  • Custom pre-made programs according to customer's needs to perform any process avoiding tedious set-ups.
  • Intuitive touch-screen panel controls and PLC for the management and display of the different programs

Available stages

  • BRIO ultrasonic cleaning.
  • Ultrasonic Rinse with DI water. Filtration systems available to optimize water consumption.
  • Drying stage.
  • Stages with any process needed. We are experts in custom-made solutions and we can design and manufacture any specific solution. 

Look at our project

Do you
need advice?

If you are not sure about the functionalities that best suit your needs, do not hesitate to contact us.

Ask our
technical department

Advantages of
BRIO technology 

Ecological and efficient

Save water and energy

Robustness and durability

Own design with the best stainless

Fast and accurate

Cleans parts of any shape in minutes

Superior cleaning power

We reach 100% of parts geometry

High cost effectiveness

Autonomy and low consumption

Discover what make us better

We tell you in detail all the benefits that our technology brings.